XTRASEAL PU FOAM / INSULATION CONSTRUCTION FOAM, MADE IN MALAYSIA

Alberto Torresi Goro Brown Boots Buy Alberto Torresi Goro Brown Boots online at best price in India from ShopClues.com. Get excited offers, read Alberto Torresi Goro Brown Boots reviews & compare prices online. Avail Fast delivery & CoD options across India. Product ID : 72802392
Rs.650 Rs.950 32% off
Sold Out

This product is currently out of stock

Item is available at 122003Change

  • Free Shipping
  • Eligible for Cash on Delivery
  • Delivery Between 7 - 9 days
  • 100% Guarantee
  • Easy Returns and Replacement

    You can place a return request within 10 days of order delivery.

    In case of damaged/missing product or empty parcel, the return request should be filed within 2 days of delivery.

    Know More
Product Details:

XTRASEAL PU FOAM / INSULATION CONSTRUCTION FOAM, MADE IN MALAYSIA

DELIVERY - The product is an Aerosol Inflammable Product and shipping is by Surface Mode only (By Road). Air Shipment is Prohibited. Delivery can take anywhere between 10-15days. WE REQUEST YOU NOT TO LEAVE NEUTRAL OR NEGATIVE FEEDBACK. We have observed deliveries of 15-20 days in the following states of India as hereunder: KERALA KARNATAKA TAMIL NADU WEST BENGAL JAMMU KASHMIR MANIPUR SIKKIM NAGALAND ASSAM ORRISA Kindly place your order considering delayed lead times for the above mentioned states only DESCRIPTION: PU-FOAM IS A ONE COMPONENT ISOLATION AND CONSTRUCTION FOAM TO FILL AND SEAL GAPS BETWEEN BUILDING MATERIALS. THE FOAM WILL EXPAND AND CURE BY MOISTURE IN THE AIR. PACK SIZE 750ML FEATURES: ♦ EASY TO APPLY. ♦ USE 100% CFK & HCFK FREE OZONE-FRIENDLY PROPELLANT. ♦ EXCELLENT ADHESION TO METAL, MANSONRY, WOOD AND MOST OF THE BUILDING MATERIALS. ♦ CURED FOAM CAN BE CUT, GLUED, PAINTED AND PLASTER OVER. USES: FILL GAPS BETWEENWALLS, CEILING AND FLOORS. SEALING FOR PERIMETER JOINTS AROUNDWINDOWS AND DOORFRAMES. SEALING FOR JOINTS AROUND TRANSIT OF WIRES AND PIPING THROUGH WALLS AND FLOORS. LIMITATIONS: NOT FOR CLOSE CONSTRUCTION ENVIROMENT. NOT FOR LOCATIONS SUBJECT TO CONTINUOUS WATER IMMERSION. FOR OUTDOOR USE THE FOAM SURFACE MUST BE PAINT TO PROTECT FROM UV-LIGHT. JOINT DESIGN: JOINTS MUST NOT WIDER THAN 4CM. WIDER JOINTS AND JOINT DEPTH MORE THAN 5CM MUST BE FILLED IN MULTIPLE LAYERS. WAITING TIME BETWEEN APPLICATIONS 15-30 MINUTES. JOINT RELATION PER APPLICATION: 10MM WIDTH * 80MM DEPTH 20MM WIDTH * 60MM DEPTH 30MM WIDTH * 40MM DEPTH 40MM WIDTH * 30MM DEPTH APPLICATION: ♦ SURFACE MUST BE CLEAN, FREE OF DUST, OIL OR GREASE. ♦ SURFACE TO BE MADE SLIGHTLY DAMPWITHWATER SPRAY. ♦ SHAKE AEROSOL CONTAINER BEFORE USE. ♦ SCREW ADAPTOR NOZZLE FIRMLY ONTO THE VALVE. ♦ TURN THE AEROSOL CONTAINER UPSIDE DOWN AND PRESS THE ADAPTOR TO APPLY FOAM. ♦ CLEAN OFF EXCESS FOAMWITH THINNER OR ACETONE. ♦ AFTER 24 HOURS, THE CURED FOAM CAN BE CUT, GLUED, PAINTED AND PLASTER OVER. CURING TIME: PU-FOAM WILL TACK FREE IN 30 MINUTES AND WILL COMPLETELY CURED AFTER 24 HOURS. SPECIFICATION: TYPE: MDI POLYURETHANE BASED APPEARANCE: AEROSOL SPECIFIC GRAVITY 0.30±0.10 SKINNING TIME APPROX. 30MINUTES (23°C & 50%R.H.) APPLICATION TEMPERATURE: 5°C TO 35°C TEMPERATURE RESISTANCE: -40°C TO 90°C ISOLATION VALUE: 25mW/ SHELF LIFE 12 MONTHS (5 ~ 25°C) CAUTION: UNCURED SEALANT MAY CAUSE SKIN, EYE AND RESPIRATORY SYSTEM IRRITATION. USE ONLY IN WELL VENTILATED AREAS. USE APPROPRIATE PERSONAL PROTECTION TO AVOID CONTACT WITH SKIN AND EYES. IN CASE OF EYE CONTACT OR IRRITATION, FLUSH EYE IMMEDIATELY WITH RUNNING WATER FOR 15 MINUTES AND GET MEDICAL ATTENTION. IN CASE OF SKIN CONTACT, WASH AFFECTED AREAS WITH HAND CLEANER FOLLOW BY SOAP AND WATER. FOR FURTHER HEALTH AND SAFETY INFORMATION CONSULT THE CURRENT MATERIAL SAFETY DATA SHEET

Product added to cart