XTRASEAL XBOND CONSTRUCTION ADHESIVE / NO NAILS (Buy 2 Get 1 Free)

Alberto Torresi Goro Brown Boots Buy Alberto Torresi Goro Brown Boots online at best price in India from ShopClues.com. Get excited offers, read Alberto Torresi Goro Brown Boots reviews & compare prices online. Avail Fast delivery & CoD options across India. Product ID : 81812496
Rs.350 Rs.800 56% off
Sold Out

This product is currently out of stock

Item is available at 122003Change

  • Shipping Charge: Rs.100
  • Eligible for Cash on Delivery
  • Delivery Between 7 - 9 days
  • 100% Guarantee
  • Easy Returns and Replacement

    You can place a return request within 10 days of order delivery.

    In case of damaged/missing product or empty parcel, the return request should be filed within 2 days of delivery.

    Know More
Product Details:

XTRASEAL XBOND CONSTRUCTION ADHESIVE / NO NAILS (Buy 2 Get 1 Free)

X’BOND CONSTRUCTION ADHESIVE SEALANT IS A CONSTRUCTION PANEL ADHESIVE ANDSELANT THAT WILL NOT SLUMP ON VERTICAL SURFACES. IT HAS BEEN FORMULATED TO BOND TO A WIDE VARIETY OF CONSTRUCTION MATERIALS INCLUDING PVC, WOOD, GYPSUM BOARD, CONCRETE, MASONRY, ALUMINIUM, GALVERNISED IRON, STEEL, FIBROUS CEMENT SHEET AND FLOOR PANELING. XBOND IS ALSO SAFE TO USE ON FOAMED POLYSTYRENE AND MIRROR BACKED TILES
FEATURES:
♦EASY TO APPLY
♦HIGH INITIAL GRAB
♦STRONG BONDING STRENGTH.
♦GOOD WATER RESISTANCE.
♦STYRENE SAFE.
                  ♦COST SAVING.
USES:
♦BONDING PVC, WOOD, GYPSUM BOARD, CONCRETE,
MASONRY, ALUMINIUM, GALVERNISED IRON, STEEL, FIBROUS CEMENT SHEET AND FLOOR PANELING.
♦BONDING FOAMED POLYSTYRENE, POLYURETHANE AND MIRROR BACKED TILES.
♦SEALING GAP FOR VARIETY OF CONSTRUCTION MATERIALS.
WE RECOMMEND PRELIMINARY COMPATIBILTY TESTS PRIOR TO APPLICATION TO ACHIEVE DESIRABLE RESULTS.
NOT RECOMMENDED FOR:
♦UNDERWATER APPLICATIONS OR PERMANENT WATER IMMERSION
♦POLYETHYLENE, POLYPROPYLENE, NYLONTMORTEFLONTM
  ♦BONDING TWO NON -POROUS SURFACES
 ♦SHOULD NOT BE USED WHERE CONTINUOUS EXPOSURE TO ELEVATED TEMPERATURE WILL OCCUR.
APPLICATION INSTRUCTIONS:
X’BOND CONSTRUCTION ADHESIVE SEALANT CAN BE APPLIED EITHER BY 1-WAY  WET STICK ADHESIVE METHOD OR 2-WAY CONTACT METHOD.
IN BOTH CASES THE FIRST REQUIREMENT IS THAT BOTH SURFACES TO BE BOND MUST BE CLEAN, DRY AND FREE OF GREASE, OIL AND DUST. ANY LOOSE OR FLAKING PAINT MUST BE REMOVED AND LIGHTLY SAND BEFORE APPLICATION.
1-WAY WET STICK ADHESIVE METHOD:
RECOMMENDED FOR HEAVIER PANELS.
APPLY 4-6MM BEAD X’BOND TO ONE SURFACE, BEADS SHOULD NOT BE 45MM APART AND BUTT JOINT SHOULD BE ADHERED ON BOTH SURFACES.
BRINGING SUBSTRATE TOGETHER WITH CLAMPED, NAILED OR SCREWED TO MAINTAIN MAXIMUM SURFACE CONTACT AT BONDED INTERFACE.
         CLEAN OFF EXCESS ADHESIVE WITH TOLUENE OR XYLE TEMPERARY FASTENING CAN BE RELEASE AFTER 24HOURS.
FOR FLOORING APPLICATION, THE ADHESIVE SEALANT SHOULD BE APPLIED TO THE FLOORING MANUFACTURER’S SPECIFICATIONS.
TO STOP FLOOR SQUEAKING, APPLY A BEAD OF X’BOND INTO THE GROOVE OF EACH PANEL AFTER IT IS LAID AND IMMEDIATELY PRIOR TO MATING THE TONGUE FROM THE NEXT PANEL.
2-WAY CONTACT METHOD:
APPLY  ADHESIVE SEALANT TO ONE SURFACE AND BRINGING SUBSTRATE TOGETHER.
       \PRESS FIRMLY OVER ENTIRE SURFACE TO TRANSFER ADHESIVE SEALANT AND         THEN  PULL BOTH SURFACES APART.
     ALLOW TO TACK OFF FOR 3-5 MINUTES.
 REPOSITION AND PRESS FIRMLY TOGETHER.
 CONTACT AREA SHOULD BE TAPPED WITH HAMMER AN DPADDED BLOCK TO ENSURE
 INTIMATE CONTACT. MAXIMUM BONDING WILL BE TAKEN FOR 12-72 HOURS TO REACH.  SOME MECHANICAL FASTENING MAY BE RETAINED FOR THIS PERIOD.
CLEAN OFF EXCESS X’BOND WITH TOLUENE OR XYLENE.
CURING TIME:
X’BOND CONSTRUCTION ADHESIVE SEALANT WILL BOND IN APPROXIMATELY 7-24 HOURS IN ROOM TEMPERATURE.
THE CURING TIME MIGHT BE LONGER FOR SMOOTHER SURFACES.
SPECIFICATION:
APPEARANCE BEIGE PASTE.
     ODOUR AROMATIC ODOUR
 SPECIFIC GRAVITY 1.15±0.05
 SOLID CONTENT 76%APPROX.
     VISCOSITY 180,000 CPS @ 25ºC, #7, 20 R.P.M.APPROX.
   LAP SHEAR  146PSI (COTTON BACKED PVC TO STEEL,
                      1 MINUTE OPEN TIME AND  CONDITIONING FOR 24 HOURS AT 20°C)
APPLICATION TEMP. -10°C TO 30°C
SERVICE
TEMPERATURE -10°C TO 85°C
   SHELF LIFE 12 MONTHS.
STORAGE:
MATERIAL SHOULD BE STORED IN A DRY AND COOLPLACE BETWEEN +50C TO +300C.
CAUTION:
HIGHLY FLAMMABLE. READ AND UNDERSTAND MATERIAL SAFETY DATA SHEET OF THIS PRODUCT BEFORE HANDLING OR USING.
This information is provided in good faith and is believed accurate based on a review of current composition and information supplied by vendors. No warranty is expressed or implied. Liability is expressly disclaimed.

Product added to cart